Roger Sisler wrote: > Can they be installed in reverse and get better extended wear? I mean > put the left axel on the right side, or inboard CV joint on the > outboard side?
If you turn the axle end for end ... but leave it on the same side of the van ... you've done nothing. You must put the passenger side axle on the driver's side and vice versa. Obviously, this is not possible with an automatic as the axles are of a different length. Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.