Date:         Sat, 11 Oct 2008 08:52:59 -0400
Reply-To:     "Jack R." <jack007@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Jack R." <jack007@COMCAST.NET>
Subject:      Re: Brake hydraulic pressure
In-Reply-To:  <96c89c360810110534p32d845f7x871f9d0f148c2df6@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

A mechanic friend told me that the new low moisture absorption and/or
synthetic brake fluids can contribute to brake line rusting.  He told me
that the moisture that isn't absorbed into the fluid resides between the
fluid and the lines, thus causing them to rust sooner.

Is what he is telling me correct?

I still feel that the best way to extend brake line life, is to bleed
annually or bi-annually at least.

Jack R.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Larry Alofs
Sent: Saturday, October 11, 2008 8:34 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Brake hydraulic pressure

On a recent trip from Chicago to Texas, my brother and I replaced the rusted
thru line leading to the rear brakes on his F*rd F-250 diesel.  The first
symptoms we noticed were the ABS light and lack of cruise control, Then we
saw the fluid leaking; fixed it in an Aut*zone parking lot in central
Illinois.

Larry A.


On Sat, Oct 11, 2008 at 6:02 AM, Mike Collum <collum@verizon.net> wrote:

> Scott Daniel - Turbovans wrote:
>
>> my wild guess is up to 1,000 psi........and that's a very wild guess.
>> why do you ask ?
>>
>
>
> Thanks.  Lines nor hoses are bursting but Maine does put nasty stuff on
> the roads and I was curious.  A local mechanic says he has replaced more
> brake lines in the past 3 years than in all the 15 years before.  This
> is mainly due to a change in what chemicals are put down.
>
> Mike
>