Date:         Sun, 12 Oct 2008 09:55:30 -0400
Reply-To:     Chris S <szpejankowski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris S <szpejankowski@GMAIL.COM>
Subject:      Re: Replacing shocks: spring compressor?
Comments: To: ckelmo1@comcast.net
In-Reply-To:  <445194915.180701223817140866.JavaMail.root@sz0023a.emeryville.ca.mail.comcast.net>
Content-Type: text/plain; charset=UTF-8

Vanagon does not use a McPherson type front suspension and the front
shocks are inside but separate from front springs.  You do not need a
spring compressor to change the shocks, front or rear.  The
instructions on the website are accurate.

On 10/12/08, Cecil Eastman <ckelmo1@comcast.net> wrote:
> As I prepare to replace the shocks for the first time (on any vehicle, for
> me) I'm asking anyone who might know anything about it.  In so doing, I
> spoke to my wife's cousin, a professional mechanic (not necessarily VW), who
> said I would need spring compressors or else risk life and limb when the
> shock comes loose and the spring goes boing.
>
> Is this true?  I was referred to this site,
> http://volksweb.relitech.com/frshocks.htm, by someone from the list and it
> doesn't say anything about compressors.
>
> Interested in keeping this body whole,
> Cecil
> '85 Westy
> "Der BrotKasten"
>

--
Sent from my mobile device

Chris S.
Disclaimer: "Death and serious injury may occur"