Shawn Wright <vwdiesels@GMAIL.COM> writes: > I replaced the rubber lines when I did the brakes on my '82 just > because of the age, and ended up replacing the rear steel lines to the > T junction as well, as I couldn't get the fittings apart without badly > tweaking the steel lines. Be prepared for this - even if you don't > plan on doing the steel lines, plans can change... It's a crappy job > doing the steel lines, but a lot easier if the tranny is out, so if > that is in the plans at all, maybe wait until then. Otherwise, be very > careful with the steel lines. Did you use flare nut wrenches? That can make a difference. No guarantee of course. Allan -- 1991 Vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.