Date: Sat, 25 Oct 2008 12:37:07 -0700
Reply-To: PB <pbrattan@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: PB <pbrattan@GMAIL.COM>
Subject: Re: Boston Bob's flywheel video
In-Reply-To: <71d9cdf90810242039j5dac6e96wf089bb08b0538e8d@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Being relatively new to Vanagons, and living in California, I had not heard
of Boston Bob before. I just viewed part of his video. Although I know
nothing at all about flywheels, I fully understand why Bob was so highly
respected within the Vanagon community, and will send a contribution.
May he rest in peace.
Patti
90 Westy Automatic.
******************************************************
On Fri, Oct 24, 2008 at 8:39 PM, Jake de Villiers <
crescentbeachguitar@gmail.com> wrote:
> Yup, its a goodie. I wish it had been around when I changed motors in
> Dixie.
>
> I talked to Bob when I swapped over the flywheel from Dixie's old motor to
> the replacement motor, which came from an automatic van. I didn't know
> about the endplay shims etc and just about sh*t myself when I heard that I
> missed an important step!
>
> Bob said "Is it running well? You must have gotten lucky. It happens.
> Don't worry about it." :-)
>
> On Fri, Oct 24, 2008 at 5:22 PM, The Westy man <thewestyman@gmail.com
> >wrote:
>
> > I'm not sure if any of you looked at this video with Bob yet.
> >
> > ----- Original Message -----
> >> From: "Bob Donalds" <donalds1@VERIZON.NET>
> >> To: <vanagon@GERRY.VANAGON.COM>
> >> Sent: Thursday, March 27, 2008 7:20 AM
> >> Subject: Re: Clutch replacement Hints
> >>
> >>
> >> I also recommend the OEM seal
> >>>
> >>> I only found out after making my Flywheel seal video that it had a
> larger
> >>> spring and
> >>> is designed to accommodate the radius at the flywheel without being
> >>> counter
> >>> sunk as it is has 12 MM dept
> >>>
> >>> for your viewing pleasure
> >>>
> >>>
> http://www.bostig.com/files/bostonbob&bostig-proper_wbxflywheel_install.wmv
> >>>
> >>> Bob Donalds
> >>> Boston Engine
> >>>
> >>>
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Ken Wilford" <kenwilfy@COMCAST.NET>
> >>> To: <vanagon@GERRY.VANAGON.COM>
> >>> Sent: Thursday, March 27, 2008 7:57 AM
> >>> Subject: Re: Clutch replacement Hints
> >>>
> >>>
> >>> I would recommend getting the crank seal from VW. These are more
> beefy
> >>>> than the aftermarket version. I have one here on the shelf for around
> >>>> $25. It is expensive but it doesn't leak. Just FYI.
> >>>>
> >>>> Ken Wilford
> >>>> John 3:16
> >>>> www.vanagain.com
> >>>>
> >>>>
> >>>> Jake de Villiers wrote:
> >>>>
> >>>>> You should definitely replace the crank seal while you're in there.
> >>>>> Cheap
> >>>>> insurance. :)
> >>>>>
> >>>>> And lube the throwout lever etcetera to keep things smooth.
> >>>>>
> >>>>> On Wed, Mar 26, 2008 at 6:55 PM, Kevin Plichta
> >>>>> <plichtakevin@hotmail.com>
> >>>>> wrote:
> >>>>>
> >>>>>
> >>>>> Looking for wisdom!
> >>>>>> I am planning on replacing my clutch on my 87 syncro.
> >>>>>>
> >>>>>> I am getting a clutch kit which includes " Pressure Plate - Clutch
> >>>>>> Disc -
> >>>>>> Throw-out Bearing - Clutch Disc Alignment Tool - Pilot Bearing",
> what
> >>>>>> other
> >>>>>> parts my I run into that may need replacing? Seals?
> >>>>>>
> >>>>>> Anything to look out for?
> >>>>>>
> >>>>>> Any odd tools?
> >>>>>>
> >>>>>> Thanks for the help.
> >>>>>> Kevin Plichta
> >>>>>>
> >>>>>>
> >>>>>> _________________________________________________________________
> >>>>>> Test your Star IQ
> >>>>>> http://club.live.com/red_carpet_reveal.aspx?icid=redcarpet_HMTAGMAR
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Jake
> >>>>> 1984 Vanagon GL
> >>>>> 1986 Westy Weekender "Dixie"
> >>>>> Crescent Beach, BC
> >>>>> www.crescentbeachguitar.com
> >>>>> http://subyjake.googlepages.com/mydixiedarlin%27
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>
> >>> --
> >>> No virus found in this incoming message.
> >>> Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.0/1344 -
> >>> Release
> >>> Date: 3/26/2008 8:52 AM
> >>>
> >>>
> >>>
>
>
> --
> Jake
> 1984 Vanagon GL
> 1986 Westy Weekender "Dixie"
> Crescent Beach, BC
> www.crescentbeachguitar.com
> http://subyjake.googlepages.com/mydixiedarlin%27
>
|