Date:         Sun, 26 Oct 2008 14:39:02 -0700
Reply-To:     Malcolm Stebbins <mwstebbins@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Malcolm Stebbins <mwstebbins@YAHOO.COM>
Subject:      FS DigiTool, w/o  ECU
Content-Type: text/plain; charset=us-ascii

This is the readout part of the Dijitool, it has 4 lights and 6 setting, it is NOT connected to an ECU, it must be wired to an ECU.

the 4 lights are labled:  STR  FP  TPS  FI

the 6 place rotating selector knob has the words:

Temp !
Temp 2
O2
AFM
Batt
Pin19

It looks like this: http://www.loam.org/vw/Vanagon/DigiTool/  but mine has a round cable of hires and not the flat ribbon cable, the wires are connected to the tool, but not the ECU.

Should be worth $50 to $100, you can BID on it,  Over $50 and I'll pay postage to CDA and USA.

Malcolm, Halifax NS

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.