I used a replacement plug that would typically go on the end of an extension cord, and a little Goop Glue, it was a perfect fit, and worked fine for a number of years... Until I landed a OEM replacement at the Buses by The Beach raffle last year. Jack R. 84 Westy Wolfie -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of William Treadway Sent: Saturday, November 01, 2008 6:34 PM To: vanagon@GERRY.VANAGON.COM Subject: Utility Plug The external 110v plug on the side of my syncro is getting old and the blades that go into the external power source are loose. How hard is it to replace the plug? do I need a special replacement or is it a standard RV external plug> Thanks in advance.
Bill Treadway 281-850-8141 Cell |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.