Mike Boland, who had the cover made that Bob refers to, asked me to post this link for him: http://www.vanagonauts.com/index.phtml?catid=105 which shows the stainless steel cover in place. Sally Strawn Vanna White, '89 Westy who also sports a Boland stainless steel fridge vent cover
----- Original Message ----- From: "Bob Stevens" <mtbiker62@COMCAST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, November 10, 2008 3:46 PM Subject: Re: Alternative to Cover Camper Fridge Vent
>I have a stainless "cover" that was fabricated by an aircraft mechanic and >given to me by a list member. It is held onto the vent by a nut, which >screws onto a bolt that was put through the center of the vent. Works very >well and easy to remove or turn upside down to store it while using the >vent if needed. The "nut" is a brass wingnut. > > bob stevens > '87 Syncro Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.