I've used a steel braided sleeve in the past for abrasion protection. They're an adjustable, universal fit. http://www.jegs.com/p/Spectre/744254/10002/-1
Angus
On Fri, Nov 7, 2008 at 12:10 PM, Allan Streib <streib@cs.indiana.edu> wrote: > Are the white plastic/vinyl "sleeves" on the fuel hose in the engine > compartment there mainly for protection against abrasion, or as heat > shields? I've seen them referred to both ways. > > I'm thinking that to avoid the "goo" problem but keep the abrasion > protection, some kind of durable "netting" or open weave sleeve could be > used to allow better breathing of any fuel vapor that permeates the > hose. > > Allan > -- > 1991 Vanagon GL > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.