Is the dash fastened tight? As for the knobs, I'm not certain, but I seem to recall that if one is installed upside down, it will rub it's neighbour. Neil. On Sun, Nov 9, 2008 at 9:27 AM, Kevin Gilbert <kggilbert@myactv.net> wrote: > Volks, > > My newly-installed heater blower motor vibrates the dash like the bed > in a cheap motel I'd like to forget. > > I've replaced the original in my '84 Westy with a new Thermex unit. I > attached spade terminals to connect to the newer-style plug on the > motor. I replaced the narrow foam weatherstripping that seats the > motor. The heater box is in good condition, and all the screws and > clips that came out, went back in. > > Also, the sliders for the heat controls now almost touch, preventing > the knobs from attaching without interfering with the adjacent slider. > > It is entirely possible this a 'fix one thing, break two or three > others' kind of project. :) > > Any suggestions? > > Thanks. > > Kevin >
-- Neil Nicholson '81 JettaWesty "Jaco http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines http://web.mac.com/tubaneil http://tubaneil.googlepages.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.