And FWIW, reverse threaded fittings I've seen, have a notch on each point of the nut. Neil.
On Wed, Nov 12, 2008 at 8:40 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote: > The only reverse thread is the POL fitting between the regulator and the > tank valve. Everything else is conventional brass, copper tube flare > fittings. > > The fridge can operate on propane with no 12 volts connection at all. The > only loss will be the rear fan and flame on indicator light. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Don Spence > Sent: Wednesday, November 12, 2008 3:10 PM > To: vanagon@GERRY.VANAGON.COM > Subject: fridge....saga continues > > uh, left hand thread on the propane fitting? > ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.