Date:         Tue, 25 Nov 2008 12:45:05 -0500
Reply-To:     Ed McLean <email99@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed McLean <email99@BELLSOUTH.NET>
Subject:      Re: Backup light switch malfunction - blinking backup lights when
              shifting

This is to follow up on the problem of malfunctioning backup lights that
came on when shifting gears and in third and fourth sometimes.  The problem
was in fact the broken bell on the end of the selector shaft.  I purchased a
shaft from Daryl and it came promptly across the country in four days.
Installation took 20 minutes, not including jacking up the bus, and the
problem was fixed.  BTW, the nose of the transmission did not have to be
lowered although it was close.

Many thanks to Daryl of AA Transaxle.

Ed McLean



On Mon, 10 Nov 2008 09:02:03 -0800, aatransaxle <daryl@AATRANSAXLE.COM> wrote:

>The selector shaft can be repl in the van. Have done it in the way past and
>think I had to drop the nose a bit, but it's doable.
>Daryl of AA Transaxle
>(425) 788-4070
>aatransaxle.com

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------