Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2008, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 22 Nov 2008 20:23:37 -0800
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: What is the best grease for CV joints?
Comments: To: email99 <email99@BELLSOUTH.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

Ed, thanks for the link. They're inviting someone to be the first to submit a testimonial for DuraBlend on that site. Sounds like that would be you ! Scott turbovans.com

----- Original Message ----- From: "email99" <email99@BELLSOUTH.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, November 22, 2008 7:57 PM Subject: What is the best grease for CV joints?

> What is the best grease for CV joints? > > It goes without saying that it is imperative to use the proper > molybdenum enhanced high-temperature CV joint specified EP (extreme > pressure) grease in constant velocity joints. Regular grease should > never be used. It's also important not to mix molybdenum enhanced > grease with regular grease because it will cause increased corrosion. > > So, what is the best type of CV joint grease? I have been greasing CV > joints for more than 36 years on my personal cars and my experience is > that Valvoline DuroBlend synthetic grease is superior to any regular, > non-synthetic, molybdenum enhanced CV joint grease I have ever used. I > have used it to reinstall CV joints that were damaged in 30k miles with > traditional CV joint grease, showing significant galling and pitting. > On reinspection of the same joints 70K later I found they had no > additional wear evident and I reinstalled them after regreasing and they > are still running. > > http://www.valvoline.com/pages/products/product_detail.asp?product=3 > > Everyone has their personal preferences and I'm sure there are other > high quality CV joint greases available. This is just my personal > recommendation of a superior product that is significantly better than > anything I have ever used. > > I have no connection with Valvoline or any other manufacture of anything. > > Ed McLean > > ------------------------------------------------------------ > + To unsubscribe from the Vanagon List send an e-mail to > + listserv@gerry.vanagon.com with SIGNOFF VANAGON > + in the body of the message. > ------------------------------------------------------------

------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.