I felt this should be a separate post since it isn't part of my electrical problem. I tried looking at the Bentley book, and for info online, but can't figure it out. While tracing electrical grounds I found what appears to be a coolant pipe with no hose connected to it! It's over cylinder 3 (left forward). I took a picture. Can anyone tell me what it should be connected to. I do get heat from the front and rear heater so I'm a bit confused as to how this connection could be open. Considering how rusty it is, it looks like it's been unused for quite a while. <http://www.kippert.com/vanagon/misc/coolant-pipe.jpg> It seems to be going towards the water pump area but I can't trace it to the other end, what with the brackets, pulleys and such. Thanks! -Mark ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.