I got a replacement for my broken one at gowesty.com. You'll need a little plumber's putty to go under the stainless steel sink flange. If you want to glue the plastic that you have back together, try JB weld. Jim On Fri, Dec 12, 2008 at 7:23 PM, David Wilhite <dlwilhite@comcast.net> wrote: > During the process of working on my Westy today I broke the drain fitting on the plastic bowl under the sink. Has anyone out there repaired one before? > > > > I don't know if I'm going to have any success, but I took the bowl off and filed off the fitting flat in hopes of finding a compression fitting tomorrow at the hardware store. > > > > David Wilhite > > 84' Westy > > Middle TN > > ------------------------------------------------------------ > + To unsubscribe from the Vanagon List send an e-mail to > + listserv@gerry.vanagon.com with SIGNOFF VANAGON > + in the body of the message. > ------------------------------------------------------------ > ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.