Yes, an '86 2.1L. Actually, I'm pointing out a rusty metal pipe/tube (about a half inch in diameter) in front of that hose. It kinda blends into the rubber hose in the background. There is nothing connected to it which is strange. <http://www.kippert.com/vanagon/misc/coolant-pipe.jpg>
On Dec 8, 2008, at 7:12 PM, George Wietor wrote: > I'm guessing a VW 2.1 liter ?. I could be wrong, but.... The rubber > hose you have highlighted for us runs from the thermo housing and > attaches to a steel pipe bolted to the engine. The other end of the > pipe attaches to a rubber elbow clamped to the front port on top of > the oil cooler. Bentley 19.14, if you like quoting Scripture. George > in Grand Rapids. > > ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.