Zeitgeist wrote: > Then why does it show 12v when tested? > > On Sun, Dec 14, 2008 at 2:13 PM, Mike Collum <collum@verizon.net> wrote: > >> The switch on the power steering pump simply completes a wire that goes to >> ground. Mine doesn't. It's only supposed to conduct current to ground when the switch "Makes" ... and that's only when the steering is at either stop. Note that the wire to the switch and the wire from the switch (to a ground point) is brown. Standard color for Vanagon ground wires. Mike ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.