Date: Tue, 9 Dec 2008 11:43:40 -0800
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: master cylinder
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
dispel any notion that stainless still 'does not corrode.'
it corrodes just fine, just more slowly than ordinary steel or cast iron.
----- Original Message -----
From: "Dave Yates" <transparu@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, December 08, 2008 2:40 PM
Subject: Re: master cylinder
>I have had to deal with brake slaves and master (and clutch cylinders
> too on other cars) over the past 40 years or so. Back in the 1970s,
> there was a crowd who bored out the cylinders and inserted a brass
> sleeve. This brought the specs back to new.
>
> These days, the process is done with stainless steel. My experience
> here in Australia is that this has been cheaper than buying new
> cylinders (unless it is a Brazilian rear brake cylinder!!). The
> returned unit is like brand new, but the bore should never corrode.
> The only "down" side to this is that I have found that if some years
> later I have to buy a "rebuild kit" (boots, seals etc) it can be more
> expensive than buying a whole new unit!! Crazy.
>
> On the other hand, if I can find someone who has the individual boots,
> seals etc,and I can identify what they are, the cost is only a few
> dollars.
>
> FWIW
>
> Dave,
> downunder
>
>
> 2008/12/8 Trooz <trooz@roadrunner.com>:
>> Are these rebuildable on the vanagons?
>>
>> Any list vendors have rebuild kits available?
>>
>> Bob Trousdale
>> '90 Westy
>>
>> ------------------------------------------------------------
>> + To unsubscribe from the Vanagon List send an e-mail to
>> + listserv@gerry.vanagon.com with SIGNOFF VANAGON
>> + in the body of the message.
>> ------------------------------------------------------------
>>
>
> ------------------------------------------------------------
> + To unsubscribe from the Vanagon List send an e-mail to
> + listserv@gerry.vanagon.com with SIGNOFF VANAGON
> + in the body of the message.
> ------------------------------------------------------------
------------------------------------------------------------
+ To unsubscribe from the Vanagon List send an e-mail to
+ listserv@gerry.vanagon.com with SIGNOFF VANAGON
+ in the body of the message.
------------------------------------------------------------
|