Date:         Wed, 10 Dec 2008 10:19:29 -0600
Reply-To:     Jim Felder <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Felder <jim.felder@GMAIL.COM>
Subject:      Re: Blacks and Vanagons
Comments: To: M'obeechi <obeechi@runbox.com>
In-Reply-To:  <E1LAOyf-0006BC-As@fenris.runbox.com>
Content-Type: text/plain; charset=ISO-8859-1

I want to do my vent wings and door handles in powder coated black.
What do I need to do to prepare them, if anything? I've head lots of
sign parts powder coated, but the pieces always came raw from the
fabricator and I never had any small, already painted items to deal
with that may have to have certain areas protected.

Jim

On Wed, Dec 10, 2008 at 7:19 AM, M'obeechi <obeechi@runbox.com> wrote:
> SEMS flexible bumper coater (used after spraying with bulldog for adhesion) is great for things like the exterior of the vent that is placed behind the rearmost side glass.
>
> For the exterior, of the same part I used Landau black by SEMS, and its great stuff.
>
> Then for the Bumper SEMS Hot Rod Black is fantastic stuff, not too dull (I spent hours searching on the internet to decide on this one, was very hard to find any well labeled pics).
>
> But, using Trim Black by SEMS on my Handles and Window Wipers was not the right move. Didn't look or feel good or right. So I just had the Window Wipers powder coated, along with the Wing Window Frames, and they look great.
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------