Date:         Wed, 10 Dec 2008 21:24:28 -0600
Reply-To:     Sunshine <vwbusgirl@KC.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sunshine <vwbusgirl@KC.RR.COM>
Subject:      Re: Painting the Wind Shield Wipers
Content-Type: text/plain; charset=US-ASCII; format=flowed

Date:    Wed, 10 Dec 2008 17:28:11 -0800
From:    Bill Prats <b.bill.p@GMAIL.COM>
Subject: Painting the Wind Shield Wipers

The paint or Black Powder Coat is coming off the wiper arms on my '89
Westy.  Any suggestions to refinish these?? I'd replace them if I
could find some in excellent condition but ......

Bill89GoWesty2.3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hey Now Bill,
I'm doing the same thing right now, painting my windshield wiper arms
due to the original finish wearing off.
I sanded the paint all off mine starting with 100 grit sandpaper, then
went down to 150 grit and finally smoothed over the bare metal with 220
grit sandpaper.

Now you can prime the bare metal with a "bare metal primer".  I think
the kind I has is put out by Rustoleum but not sure.  From there just
get Black Satin Rustoleum spray paint and spray them.  I'm also going
to give mine a coat of Satin Polyurethane spray.

That's just what I'm doing, I'm sure there are a zillion other ways.

Peace,
Sunshine
1989 Wolfsburg Edition Vanagon GL "Stella Blue"
1987 Vanagon GL "Parts Bus"
1974 VW Transporter Bus "Buddy"

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------