Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2008, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 10 Dec 2008 21:33:45 -0800
Reply-To:     M'obeechi <obeechi@RUNBOX.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         M'obeechi <obeechi@RUNBOX.COM>
Subject:      Re: [VWVANFULLTIMERS] Propex heaters : group purchase offer
Comments: To: groups@WESTYVENTURES.COM
In-Reply-To:  <493D2B80.5070903@westyventures.com>
Content-Type: text/plain; charset="iso-8859-15"

Karl, do you always mount the heaters on the passenger side? Have you ever put them on the driver side. Curious to know, as I still haven't installed my green one (read: big size).

From: Karl Mullendore <groups@WESTYVENTURES.COM> To: vanagon@GERRY.VANAGON.COM Subject: Re: [VWVANFULLTIMERS] Propex heaters : group purchase offer

> Are you referring to the exhaust and inlet pipes for the burner, or the > heat ducting? The stainless flex pipes for the burner can make some > fairly tight bends, however the heater should be mounted on the floor or > sidewall so that the pipes exit the interior in a short distance as > possible; from there they can bend. > > Karl > > M'obeechi wrote: > > I have the larger Propex. My challenge is that I need to install it > > on the passenger side, under the rear seat, but no further from the > > passenger side than those two factory holes meant for the stock rear > > heater coolant lines. Those vent hoses the Propex came with are large > > enough that turning a sharp corner or turn, doesn't look possible. So > > maybe this means I have to have something fabricated, or else maybe > > these is some product out there that I'm not aware of that allows for > > venting hoses through tighter turns. > > ------------------------------------------------------------ > + To unsubscribe from the Vanagon List send an e-mail to > + listserv@gerry.vanagon.com with SIGNOFF VANAGON > + in the body of the message. > ------------------------------------------------------------ >

----- End Original Message -----

------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.