Date:         Fri, 12 Dec 2008 09:35:03 -0800
Reply-To:     Neil2 <vidublu@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil2 <vidublu@GMAIL.COM>
Subject:      Re: Propex heaters
Comments: To: mtbiker62@comcast.net
In-Reply-To:  <121120081440.14187.494126480002341E0000376B2205886172CDC09D0A05070D9B03@comcast.net>
Content-Type: text/plain; charset=ISO-8859-1

If you don't find the Propex dimensional data you need to answer your
questions let me know.  I know of an owner who has one and installed an
inverter under his Vitrifrigo.  Between the measurements of the three we
should be able to ascertain whether a Propex will fit.

On Thu, Dec 11, 2008 at 6:40 AM, Bob Stevens <mtbiker62@comcast.net> wrote:

> Didn't someone (Frank) put a Propex in the small, lower cabinet left of the
> fridge?
>
> Bob
>
> > If the owner desires to keep the original rear heater in place, then
> > that's where the propex has to go. If you were to not have or remove the
> > rear coolant heater, then sure, the Propex could move over. Just be
> > careful where you drill the holes for the burner pipes, as there are
> > more frame parts in the way toward the center of the van.
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>



--
Neil2
'82 Diesel Westfalia (USS Tinosa)
'86 Vanagon/Westfalia Wannabe (SaVannah)
Nunquam Pendite Divendium

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------