'rark' is an intersting word. I like it. just wanted to say it feels like the 12 point ones are made of much harder metal. I think of hundreds of the 12 point ones I've installed, or ones I was removing, I've had only one strip out where the tool engages, versus many dozens of the 6 point allen ones - those strip out pretty easily.
----- Original Message ----- From: "Dave Yates" <transparu@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, December 15, 2008 3:22 PM Subject: Re: Vanagon CV Joint Fasteners
> About 2 years ago I replaced my hex-head bolts with these from > Autohaus Az. I recently had to remove all CV joints (to replace wheel > bearings) and found these MUCH easier to engage with in the dim rark > recesses of the outer CV joints.. FWIW. > Dave > downunder > > > 2008/12/16 pdooley <psdooley@verizon.net>: >> That would be http://tinyurl.com/vanagoncvbolts >> >> Autohaus FTW. >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >> Of >> Florian Speier >> Sent: Monday, December 15, 2008 12:36 AM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: Vanagon CV Joint Fasteners >> >> I would go for the german 12 point ones, available here for $0.45: >> *http://tinyurl.com/vanagoncvbolts >> >> florian >> * >> >> ------------------------------------------------------------ >> + To unsubscribe from the Vanagon List send an e-mail to >> + listserv@gerry.vanagon.com with SIGNOFF VANAGON >> + in the body of the message. >> ------------------------------------------------------------ >> >> ------------------------------------------------------------ >> + To unsubscribe from the Vanagon List send an e-mail to >> + listserv@gerry.vanagon.com with SIGNOFF VANAGON >> + in the body of the message. >> ------------------------------------------------------------ >> > > ------------------------------------------------------------ > + To unsubscribe from the Vanagon List send an e-mail to > + listserv@gerry.vanagon.com with SIGNOFF VANAGON > + in the body of the message. > ------------------------------------------------------------ ------------------------------------------------------------ + To unsubscribe from the Vanagon List send an e-mail to + listserv@gerry.vanagon.com with SIGNOFF VANAGON + in the body of the message. ------------------------------------------------------------ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.