Date:         Tue, 16 Dec 2008 09:22:02 +1000
Reply-To:     Dave Yates <transparu@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Yates <transparu@GMAIL.COM>
Subject:      Re: Vanagon CV Joint Fasteners
Comments: To: pdooley <psdooley@verizon.net>
In-Reply-To:  <0KBX00AL1AN1TMK0@vms173001.mailsrvcs.net>
Content-Type: text/plain; charset=ISO-8859-1

About 2 years ago I replaced my hex-head bolts with these from
Autohaus Az.  I recently had to remove all CV joints (to replace wheel
bearings) and found these MUCH easier to engage with in the dim rark
recesses of the outer CV joints..  FWIW.
Dave
downunder


2008/12/16 pdooley <psdooley@verizon.net>:
> That would be http://tinyurl.com/vanagoncvbolts
>
> Autohaus FTW.
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Florian Speier
> Sent: Monday, December 15, 2008 12:36 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Vanagon CV Joint Fasteners
>
> I would go for the german 12 point ones, available here for $0.45:
> *http://tinyurl.com/vanagoncvbolts
>
> florian
> *
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>
> ------------------------------------------------------------
> +    To unsubscribe from the Vanagon List send an e-mail to
> +    listserv@gerry.vanagon.com with SIGNOFF VANAGON
> +    in the body of the message.
> ------------------------------------------------------------
>

------------------------------------------------------------
+    To unsubscribe from the Vanagon List send an e-mail to
+    listserv@gerry.vanagon.com with SIGNOFF VANAGON
+    in the body of the message.
------------------------------------------------------------