Do you have any pics of this setup? I'm pretty sure those are the same rims I used to have on my Mercedes--IIRC, staggered with 7.5" ET37 up front and 8" ET30 on the rear. Essentially the 17" versions of my 16" SLK rims. Did you modify the center bore and drill out the holes for the wheel bolts? Which wheel bolts/nuts did you use? Thanks, Casey On Tue, Dec 23, 2008 at 10:41 AM, Hector Zapata <hlzapata@gmail.com> wrote: > I am running 245/40 17s in the rear, 225/45 17s up front, no spacers, > original MB 5 spoke C230 wheels, wich should be the ET you are asking > about. > > Héctor > 1990 Carat 'Ursula' > > -- Casey '87 300TD '94 100CSQ Avant '89 Bluestar |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.