Date: Thu, 25 Dec 2008 20:00:54 -0800
Reply-To: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject: Re: vanagon seam rust repair
Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original
ok .........
here's my short version.
I have tricks too for where there is actually a hole through
something...........but this is for surface body rust ........or even frame
surface rust, etc. :
first I hit the spot with a wire brush wheel on a Mikita disc grinder (
takes 3 seconds on a one inch diameter spot )
- or I just use a small hand wire brush....
then I spray it with 'rust neutralizer' ...........
or use brush on rust neutrailizer............the stuff that says 'turns rust
into paintable primer'
so if I power wire brush it, then spray that spot with a spray can
............that can be under 10 seconds.
later when that's dry, I might paint it.
if I really want to get nutty, after the rust conversion stuff dries,
then I spray the spot with self-etching primer . ( or use a small brush )
when that's dry, I put any paint I want on top of that.
If it's an extereior body part...........and I can get the exact right shade
of paint by paint code.........
that's a very solid repair.
that's 4 easy steps for a full repair ..........wire brush, put rust
converter on, prime it, paint it.
And thin coats of the rust converter or the primer paint dry pretty quicky
in good conditions.
I just do other stuff for a while while waiting for the rust converter or
primer to dry. Sometimes 20 minutes is enough.
" more " :
I might use a heat gun to dry and warm things if conditions are cool and
damp,
or but a 500 watt work light near the spot if it's cool and damp. I do
most of my creative work at ngiht. It's just so much more peaceful then.
oh.....primer ............sure makes a difference. Makes the final coat go
on MUCH better .
And the stuff in the srpay can that says 'self-etching primer'
.............I find that works really well as a primer.
it's light green in color. works great.
And if you can get the exact color of touch up paint by color code, for
spots that show......you can almost 'dissappear' a bad spot.
Underneath the van, I use whatever color seems right .............light gray
for example.
Sometimes I use spray paint in a can that says 'rust stop paint' on the can.
Warming a can of spray paint in warm water really helps too. Just don't
overdo it ! I got one can way too hot a long time ago.............shaking
it, the bottom of the can blew out spewing paint everywhere ! They don't
seem to srpay right if too hot either..............just warmed up nicely.
For tiny spots where spray isn't right..........I just spray some of the
paint from the srpay can into the cap for the can, then dip a tiny brush in
that, and apply by brush.
I find myself restoring at least as much as repairing. Kinda 'art work'
that way. Very rewarding.
Scott
www.turbovans.com
----- Original Message -----
From: "miguel pacheco" <mundopacheco@gmail.com>
To: "Scott Daniel - Turbovans" <scottdaniel@turbovans.com>
Cc: <vanagon@gerry.vanagon.com>
Sent: Thursday, December 25, 2008 7:30 PM
Subject: Re: vanagon seam rust repair
> Well then, Scott, please treat us with at least some of this wisdom.
> For example, I have a couple of spots out in the garage, on one of my
> Syncros, that need attention. I'm sure they are candidates for a 30
> second treatment. Please continue.............
> Gracias,
> Miguel
>
>
>
> On Thu, Dec 25, 2008 at 5:37 PM, Scott Daniel - Turbovans
> <scottdaniel@turbovans.com> wrote:
>> my response is , if you are going to put it as a command .......
>> as in 'do this.'
>> I will say 'yes sir.'
>> not sincerely of course.
>> It's a useful link.
>> I have my own huge bag of tricks for rust.....I just LOVE treating and
>> stopping it for good.
>> It's hyper easy too, in the early stages.
>> I can literally stop a spot of rust for good in 30 seconds. And not with
>> expensive materials or anything difficult or complicated either.
>> I hope this will inspire people to treat all rust as soon as you notice
>> any.
>>
>> ----- Original Message -----
>> From: <JordanVw@AOL.COM>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Thursday, December 25, 2008 11:34 AM
>> Subject: vanagon seam rust repair
>>
>>
>>> read and save..
>>>
>>> http://www.vanagonauts.com/Idiot-s-guide-to-seam-rust-repair180.htm
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> **************
>>> One site keeps you connected to all your email: AOL Mail,
>>> Gmail, and Yahoo Mail. Try it now.
>>> (http://www.aol.com/?optin=new-dp&
>>> icid=aolcom40vanity&ncid=emlcntaolcom00000025)
>>
|