Date:         Tue, 23 Dec 2008 11:13:05 -0500
Reply-To:     Chris S <szpejankowski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris S <szpejankowski@GMAIL.COM>
Subject:      Re: I gotta tranny... what is the gearing? no codes
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <E1A07257D16A40E1AB42C8372EF2C8E1@DADSTOSHIBA>
Content-Type: text/plain; charset=UTF-8

Might want to make sure ignition is off first.  :-)

On 12/23/08, Dennis Haynes <d23haynes57@hotmail.com> wrote:
> For a manual transmission, put it n gear, push the van until the tires
> make a revolution and count how many times the engine turns. This will
> give the overall gearing.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Matthew
> Sent: Monday, December 22, 2008 4:16 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: I gotta tranny... what is the gearing? no codes
>
> I'm working on a person's bus and he wants to know the gearing.
> Supposedly the tranny is a  TiICo rebuild (yes, tiico...). All codes on
> the bottom side have been ground out.   There are zero marks otherwise.
> None, zilch. yikes.
>
> So how do I figure out the gearing? it is a 2wd vanagon tranny from a 86
> bus.
>
> I don't want to pull the bellhousing to count the final drive.
>
> I could figure it out empricially with rpm and speed i guess. Anybody got
> a solid answer otherwise?
>
> thanks
> matt
>
>
>  "may the four winds blow you safely home"
>

--
Sent from my mobile device

Chris S.
Disclaimer: "Death and serious injury may occur"