Date:         Mon, 22 Dec 2008 20:55:59 -0500
Reply-To:     Robert Stewart <robertmstewart@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Stewart <robertmstewart@MAC.COM>
Subject:      Re: Burnt Wires!!-Please look and advise
Comments: To: Michael Sullivan <sandwichhead@GMAIL.COM>,
          Mike Collum <collum@VERIZON.NET>
In-Reply-To:  <eccfedcc0812220403x1e1b7130q7f3365899f09a7fc@mail.gmail.com>
Content-type: text/plain; charset=ISO-8859-1; format=flowed; delsp=yes

I believe the one hanging loose off the harness is yellow. I have to  
check it to be sure.

So what side should it be connected to L or R of the ends on the  
pspump? which connecting side?

Which side should connect to to  powersteering pump for the ground? L  

or Right?

Robert
NY

On Dec 22, 2008, at 7:03 AM, Michael Sullivan wrote:

> Mine were yellow and blue.  I'm sure about the yellow one, but the  
> blue one
> was toast when I saw it so I could be wrong.
>
> On Sun, Dec 21, 2008 at 8:49 PM, Mike Collum <collum@verizon.net>  
> wrote:
>
>> Robert Stewart wrote:
>>
>>> Can anyone tell me what the wires that are suppose to connect to the
>>> PS pump look like?
>>>
>>
>> Robert, that wire you found, if it's the right one, is brown and
>> "Originally" came with a 90º female spade connector.
>>
>> The wire you're missing is just another brown wire with a 90º female
>> spade connector that goes from the power steering pump switch to a  

>> good
>> ground.  Replacement spade connectors don't "Have" to be 90º types of
>> course.
>>
>> Mike
>>
>
>
>
> -- 
> Michael in San Antonio
> 91GL AT 'Gringo'