Thanks John. Grounding the high pressure wire from the unit, made sense in my mind. I assume grounding that wire won't affect the electrics of the low pressure side on the Dynamic .... Unit.
On Thu, Jan 8, 2009 at 5:08 PM, John Lauterbach <jhlauterbach@bellsouth.net> wrote: > At one time one of the list vendors had a copy of the wiring changes > that needed to be made to install a late model instrument cluster into > an older model van. I know that I had to do the wiring change on my '84 > when I installed a new instrument cluster and that one of the pins had > to go to ground to keep the buzzer from sounding. > > John > > On Thu, 2009-01-08 at 14:59 -0800, neil N wrote: >> >> Maybe try grounding the pin T14 ...... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.