I've used a flat blade/standard screw driver as a lever to pry on the underside of the wiper hub, putting a rag or other device to avoid chipping/scratching the paint, and moving the s-driver around the base until it finally pops off. Patience and moderation are in order and result in not creating other problems. bob Subject: How do I remove a wiper arm? Anyone have any suggestions on how get the arm off the shaft without bending or breaking something? Thanks, John Rodgers 88 GL Driver |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.