At 12:59 PM 1/30/2009, David Beierl wrote... >Sounds like a candidate for a +12v regulator and a few diode drops, or >a +5 and a five-volt zener on the ground lead. It's not like it's a >precision application... A 78M10 is an easier choice, but note that the TCA700Y pinout is different than standard VRs (input and output are swapped). You would also need to add input and output bypass capacitors. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.