Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2009, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 30 Jan 2009 13:50:22 -0500
Reply-To:     Mike S <mikes@FLATSURFACE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike S <mikes@FLATSURFACE.COM>
Subject:      Re: Gauge panel regulator was Re:...gas guage)
Comments: To: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <49833ffe.0a04d00a.34cf.ffffc69d@mx.google.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 12:59 PM 1/30/2009, David Beierl wrote...
>Sounds like a candidate for a +12v regulator and a few diode drops, or
>a +5 and a five-volt zener on the ground lead.  It's not like it's a
>precision application...


A 78M10 is an easier choice, but note that the TCA700Y pinout is
different than standard VRs (input and output are swapped). You would
also need to add input and output bypass capacitors.
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.