Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (February 2009, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 3 Feb 2009 23:13:35 -0500
Reply-To:     pdooley <psdooley@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         pdooley <psdooley@VERIZON.NET>
Subject:      Re: Enlarged (ovaled) Radius Arm Hole Fix? PICS
Comments: To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
In-Reply-To:  <71d9cdf90902032001h627b0721h52f35aa407e675ca@mail.gmail.com>
Content-type: text/plain; charset=us-ascii

Come on Jake, if Neil can build an engine cradle I'm sure he can tackle this job with his MIG...

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jake de Villiers Sent: Tuesday, February 03, 2009 11:02 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Enlarged (ovaled) Radius Arm Hole Fix? PICS

Yeah, what Scott said about epoxy!!

Welding Neil, and maybe by someone with a real stick welder and some structural welding experience...........

On Tue, Feb 3, 2009 at 6:34 PM, neil N <musomuso@gmail.com> wrote:

> Hi all. > > Sadly between myself and the PO, we let the radius arm bushings get > too worn out. ( I choose to lay most of the blame on the PO <grin>) > > Worn bushings caused this: http://tinyurl.com/buwusy > > Which ovaled radius arm hole in subframe: http://tinyurl.com/csv5l3 > > I think I need to bring this hole back to it's original ID. If so...... > > Weld or bolt a steel plate on? Or..... > > Shape a piece of steel to fit, epoxy it to sit on edge of hole where > ovaled? Would it stay in place considering it's sandwiched between > bushings etc. ? > > Thanks guys. Really appreciate the help. Hopefully I'm not wearing out > my "welcome" here with so many questions. :) The good news is that I > photo this stuff to help or warn others of what NOT to do! > > Neil. > > -- > Neil Nicholson '81 VanaJetta "Jaco > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engine s > http://web.mac.com/tubaneil > http://tubaneil.googlepages.com/ >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" Crescent Beach, BC www.crescentbeachguitar.com http://subyjake.googlepages.com/mydixiedarlin%27


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.