Date:         Wed, 4 Feb 2009 19:20:10 -0800
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: wtb muffler bracket
Comments: To: Leo Lipert <leolipert@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="Windows-1252";
              reply-type=original

Those exhaust brackets are for 2.1 waterboxer engines.
won't normally   fit on a 1.9 .......which is what an 84 has.

I haven't seen it done, but I suppose someone could put a 2.1 'rear aluminum
mount/exhaust bracket' on a 1.9 waterboxer engine.
I haven't tired that yet.
You could have a 2.1 wbxr entire exhaust system on a 1.9 ...........it'll
fit just fine,
if that's the case......these brackets could be right for you.
a 2.1 uses 2 of those brackets of course.
and the diameter of a  1.9 muffler is smaller than the diameter of a 2.1
muffler.....
a factor that may matter.
Scott
www.turbovans.


----- Original Message -----
From: "Leo Lipert" <leolipert@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, February 04, 2009 6:55 PM
Subject: Re: wtb muffler bracket


> Oops, should have said that the brackets are for a 2wd '84
>
>
>
>
>
> On Wed, 4 Feb 2009 18:26:27 -0800, Leo Lipert <leolipert@GMAIL.COM> wrote:
>
>>Any one have a pair of these they'd like to get rid of?
>>
>>http://members.cox.net/leolipert/muffler%20bracket.jpg
>>
>>Thanks, Leo