Date:         Thu, 19 Feb 2009 18:31:19 -0600
Reply-To:     Michael Sullivan <sandwichhead@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Sullivan <sandwichhead@GMAIL.COM>
Subject:      Re: Steering wheel removal-THANKS!
In-Reply-To:  <C5C33799.12F85%gsm@gregorysmorrison.com>
Content-Type: text/plain; charset=ISO-8859-1

If you haven't already gotten the turn signal handle. I have a free one, I
believe. LMK.
Thanks for the update on your request and I second all the good, prompt
advice.

On Thu, Feb 19, 2009 at 6:21 PM, Gregory S. Morrison <
gsm@gregorysmorrison.com> wrote:

> THANKS A MILLION to all that replied, and to those that thought about
> replying but saw that I had already received a lot of responses.
>
> The Vanagon/Westy/Syncro community is a great bunch of folks!
>
> Thanks and drive safe!
> Greg
>
>
> On 2/19/09 4:06 PM, "Bob Stevens" <mtbiker62@COMCAST.NET> wrote:
>
> > Grab the top "lip" of the long horn bar and pull toward you and it will
> pop
> > off. It's held in place by a couple spring steel clips. You'll need about
> a
> > 22mm? socket, the longer the better. I use an 18 inch long, 1/2" drive
> breaker
> > bar, to enscrew the nut holding the s/wheel on.
> >
> > bob
> >
> > How do you remove a Vanagon steering wheel? It's an '86 if that makes a
> > difference. Directions and any "been there done that" tips would be
> really
> > appreciated. I'm pulling it in order to install a new turn signal arm.
> >
> > Thanks,
> > Greg
> > 1986 Westy Syncro
> >
>



--
Michael in San Antonio
91GL AT 'Gringo'