On Wed, Feb 25, 2009 at 5:08 PM, mark drillock <mdrillock@cox.net> wrote: > Look at page 17.7 which is the engine lubrication section. It shows the > switch and says 0.3 bar. The second switch for 2.1 says 0.9 bar. > > The wiring diagrams have some mistakes and that 1.8 bar is among them. > We have been over this oil switch error here many times. > > Mark > > Thanks Mark. I saw discussions in the archives but it related to the 2.1 WBX oil pressure switches. As you say though, it's been discussed. I should have looked harder. My bad. It sounds silly, but I'd gotten so used to looking at wiring diagrams for trouble shooting my conversion, that when I had occasion to look for that oil pressure switch detail (due to another thread here) the wiring diagram was the first place I looked! Didn't think to look at the engine lubrication section. Like duh. <rolls eyes> ;)
Neil.
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.