Doug Noganav wrote: > Anybody on here have any experience removing the head and case studs from a water boxer case? I have no idea if this is the "Recommended" way but here's what I did successfully. Once the heads were removed, I "Double nutted" the tops of the studs and used a mapp gas torch on the case where the studs screw in then turned 'em out with a wrench on the lower nut of the double nut arrangement. Mike |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.