Date:         Wed, 25 Feb 2009 18:36:11 -0800
Reply-To:     neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         neil N <musomuso@GMAIL.COM>
Subject:      Re: Bentley Typo? (1.9 WBX oil pressure switch)
Comments: To: mark drillock <mdrillock@cox.net>
In-Reply-To:  <49A5EB93.6030704@cox.net>
Content-Type: text/plain; charset=ISO-8859-1

On Wed, Feb 25, 2009 at 5:08 PM, mark drillock <mdrillock@cox.net> wrote:
> Look at page 17.7 which is the engine lubrication section. It shows the
> switch and says 0.3 bar. The second switch for 2.1 says 0.9 bar.
>
> The wiring diagrams have some mistakes and that 1.8 bar is among them.
> We have been over this oil switch error here many times.
>
> Mark
>
>

Thanks Mark.

I saw discussions in the archives but it related to the 2.1 WBX oil
pressure switches. As you say though, it's been discussed. I should
have looked harder. My bad.

It sounds silly, but I'd gotten so used to looking at wiring diagrams
for trouble shooting my conversion, that when I had occasion to look
for that oil pressure switch detail (due to another thread here) the
wiring diagram was the first place I looked! Didn't think to look at
the engine lubrication section.

Like duh. <rolls eyes>    ;)


Neil.


--
Neil Nicholson '81 VanaJetta 2.0 "Jaco"

http://tubaneil.googlepages.com/

http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines