Date: Sat, 28 Feb 2009 08:26:28 -0800
Reply-To: dylan friedman <insyncro@YAHOO.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: dylan friedman <insyncro@YAHOO.COM>
Subject: Re: Engine stutters, tach nosedives. Then, just as suddenly,
it's normal again.
Content-Type: text/plain; charset=iso-8859-1
Here is a pic of my emergency fix of the Hall Sender connector on the exterior of the dist.
Got me home safe and sound.
Swapped in a dist. with a good connection and it is still going strong.
http://images.thesamba.com/vw/gallery/pix/517437.jpg
dylan
________________________________
From: Greg Potts <greg@POTTSFAMILY.CA>
To: vanagon@GERRY.VANAGON.COM
Sent: Saturday, February 28, 2009 11:08:54 AM
Subject: Re: Engine stutters, tach nosedives. Then, just as suddenly, it's normal again.
Hi Ken,
The Hall sensor definitely has potential to be a culprit here, as a
no-start condition required that it be removed and reattached while at
EveryBus just after I picked up the vanagon. Since that time the
external connector has been held to the distributor with a sturdy cable
tie, and everything has been fine. I checked it yesterday, it remains
dry and well anchored.
I have a complete spare engine, but it's a 1.9 and the hall sensor has a
completely different connector, so it's not the easy swap I thought it
would be. My franken-engine is a 1.9 block using 2.1FI and cooling.
I guess I'll add a replacement hall sensor kit to the ASAP tune-up list
and keep my eyes open for a spare ECU locally. But if things suddenly go
south and I need one in a hurry I certainly appreciate knowing where I
can get one when I need it.
Happy Trails,
Greg Potts
1973/74/79 Westfakia "Bob the Tomato"
1987 Wolfsburg Weekender Hardtop
www.busesofthecorn.com
www.pottsfamily.ca
Ken Wilford wrote:
> Greg, I was having this problem and it progressively got worse over
> time. In my case it turned out to be the hall sensor in the
> distributor. I replaced this and have been fine ever since.
> However it can also be the ECU since they are known for having bad
> solder joints and since they have the coil driver (ignition module)
> built in you can see how this can cause cutting out.
>
> The big problem is the problem being intermittent. I had this problem
> rear it's ugly head on the coldest day of the winter for two winters.
> The first time I replaced the ECU and changed the fuel filter and it
> seemed to go away.
> The second time it got to a point where the van would no longer run and
> I swapped in a known good distributor and found the problem.
>
> Let me know if we can help you further. I have rebuilt ECUs in stock
> for $250 and rebuild distributors as well (or you can buy the hall
> sensor only and rebuild your own).
>
> Hope this helps,
> Ken Wilford
> John 3:16
> www.vanagain.com
|
Back to: Top of message | Previous page | Main VANAGON page
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives
@ gerry.vanagon.com
The vanagon mailing list archives are copyright (c)
1994-2011, and may not be reproduced without the
express written permission of the list administrators.
Posting messages to this mailing list grants
a license to the mailing list administrators to reproduce
the message in a compilation, either printed or electronic.
All compilations will be not-for-profit, with any excess
proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively
towards the management and operation of the Vanagon mailing
list and vanagon mailing list web site.