Thanks all for the help, got the bulb out from the speedometer side and it looked good so I tried putting in the one for the clock side which was working and it also didn't work on the speedo side and the middle one doesn't work either even with the bulb that I know is good from the clock side. What would be the next step. Also the temp and gas gauge come on and off. I can get them to stay on by pulling out the big plug that connects all the ribbon strip. Pulling it out a little or wiggling it a little makes them come on. But doesn't do anything for the lights.
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of dj Sent: Monday, March 09, 2009 10:31 PM To: vanagon@GERRY.VANAGON.COM Subject: how to remove an instrument panel bulb Can someone tell how to remove an instrument panel bulb? The one for the speedometer on my 84 Vanagon is not working and I want to take it out to look at it. I have tried pulling and turning the small plastic housing around it but no luck. Thanks, deek |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.