Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 10 Mar 2009 14:41:15 -0700
Reply-To:     Courtney Hook <courtneyhook@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Courtney Hook <courtneyhook@SHAW.CA>
Subject:      Re: home-made pressure bleeder
Comments: To: Zeitgeist <gruengeist@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Will this work on my type2 bay window? It has a remote reservoir under my front seat. Thanks! Courtney

----- Original Message ----- From: "Zeitgeist" <gruengeist@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, March 10, 2009 12:15 PM Subject: Re: home-made pressure bleeder

> You just pump it to something like 20 psi and then crack the lines in your > typical fashion...with no need to pump the pedal. Make sure to fill it > with > enough brake fluid, though. > > On Tue, Mar 10, 2009 at 12:07 PM, Courtney Hook > <courtneyhook@shaw.ca>wrote: > >> When you are using this, do you just build up the pressure to 20-25psi, >> then crack a wheel bleeder? There is no need to operate the brake pedal >> to >> "open" any internal passages etc in the master cylinder? When I do it >> regularly, I pump the pedal of course, with a helper. >> Thanks, >> Courtney >> ----- Original Message ----- From: "Zeitgeist" <gruengeist@GMAIL.COM> >> To: <vanagon@GERRY.VANAGON.COM> >> Sent: Tuesday, March 10, 2009 9:33 AM >> Subject: Re: home-made pressure bleeder >> >> >> >> I built that exact type of bleeder--works great! >>> >>> On Tue, Mar 10, 2009 at 9:22 AM, sam mccarthy <sfcompost@yahoo.com> >>> wrote: >>> >>> Folks, I found this page when searching for a pressure bleeder >>> mentioned >>>> in >>>> the recent posts about clutch slave cylinders. This should help the >>>> bleeding >>>> procedure if like me you never have anyone around to pump the pedal. >>>> http://www.bmw-m.net/TechProc/bleeder.htm >>>> Sam M >>>> >>>> >>> -- >>> Casey >>> '87 300TD >>> '94 100CSQ Avant >>> '89 Bluestar >>> >> >> > > > -- > Casey > '87 300TD > '94 100CSQ Avant > '89 Bluestar


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.