Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 10 Mar 2009 22:42:35 -0500
Reply-To:     Max Wellhouse <dimwittedmoose@CFU.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <dimwittedmoose@CFU.NET>
Subject:      Re: 16" Tire recommendations
Comments: To: colorworks@GCI.NET
In-Reply-To:  <0E8104D59D81478195C318D254327279@troyb5bff49d63>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I didn't think the HydroEdge had the stiff sidewalls, but maybe I'm misinformed. Ditto for the Goodyear tire in question.

DM&FS

.At 07:06 PM 3/10/2009, Troy wrote: >Hi Folks: > >Finally got myself a set of Mercedes rims that I'm happy with. >Wasn't so happy about enlarging the holes from 12 to 14 mm, what a >job as the drill bit tends to catch the edges of the hole, so you >have to go extremely slow with light pressure, which ends up taking >about 10 minutes per hole or better. Anyway, now moving my attention >to tires. Looking for a summer or possibly all season radial. I know >that Go Westy recommends the Michelin Hydroedge, Sears was pushing >the Goodyear triple cut as superior, but I'm sure there's all kinds >of options. Anybody have any recommendations as to what to buy and >what to steer clear of? I'm in absolutely no hurry, so if I know of >particular brand I can possibly wait for a sale. I was also going to >go with the 215/60/16 unless somebody gives me a good reason not to. > >Lastly, looking for an inexpensive source to purchase longer studs >for the rears. Suggestions? I think I will use Chris (loogy) from >the Samba for the front bolts and spacers. The guy is a wealth of >knowledge and has gone out of his way to help me. Even though he's a >little more expensive I like to support this kind of individual. He >does not sell the studs however. > >Thanks, > >Troy


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.