Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2009, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 7 Mar 2009 21:01:13 -0800
Reply-To:     AD Felder <dieseldoofus@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         AD Felder <dieseldoofus@YAHOO.COM>
Subject:      Re: 82 westy drive belts
Comments: To: Jake Beaulieu <jake_beaulieu@yahoo.com>
Content-Type: text/plain; charset=iso-8859-1

OOPS, sorry!  I forgot to mention mine is a diesel.  The busdepot is 10mm and is the single belt for the aircooled.  The diesel takes two shorter ones, in 9.5mm.

--- On Sat, 3/7/09, Jake Beaulieu <jake_beaulieu@yahoo.com> wrote:

From: Jake Beaulieu <jake_beaulieu@yahoo.com> Subject: Re: 82 westy drive belts To: "AD Felder" <dieseldoofus@YAHOO.COM> Date: Saturday, March 7, 2009, 10:45 PM

http://www.busdepot.com/view.jsp?model=42&category=3&group=-1&prodgroup=-1   worked for me

From: AD Felder <dieseldoofus@YAHOO.COM> To: vanagon@GERRY.VANAGON.COM Sent: Saturday, March 7, 2009 11:29:38 PM Subject: 82 westy drive belts

My owner's manual indicates that the v-belts are to be 9.5x600 LA and 9.5x643 LA.  I have not been able to find these sizes anywhere.  10mm, yes, sometimes, but not both sizes from the same place even.  I have found little to no information about belt sizes on the i-net.  Some mfr's websites "hint" that the 10mm are actually 9.5mm wide (Bando, I think).  Here is some handy info about belts and pulleys, that also indicates 9.5 being the actual standard width, along with 12mm http://www.gizmology.net/pulleysbelts.htm and that you should not change belt widths.   Questions:   There is only .5mm difference between the two sizes.  Is this significant and/or did VW just pull that size out of a hat, even though 10mm width belts were common at that time as well.  Air cooled (at least some) are called out as 10mm.   Why does no-one, including VW parts suppliers, list these belts?   Any sources for 9.5 belts?  I would like to use Conti, but there are NO retail sellers of Conti in this country that I could find.  Their "local" office for the US is in Thailand, I think.   I humbly await someone to educate me about this.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.