I have three unplugged wires around the fuse block and can't figure out where they're spozed to go in a 90 GL that originally had AC. One pair are set up as male spades in a T-2 type connector at right angles to each other. The wires are red/black and black/yellow and both head down to the conduit/loom that travel towards the radiator fan area. The other is a skinny blue/red wire with a female spade encased in a yellow insulator. It originates from what appears to be the brown multi point connector in the back of the fuse block. The color codes certainly hint of cooling system, but unless they plug into the J101 relay, I don't know where they go. I have had some potential cooling fan issues, but the Bentley says the blur red wire is spozed to be 1.5 and this wire seems skinner than that. Any help would be appreciated on a lonely Friday night!! TIA DM&FS |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.