Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2009, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 18 Mar 2009 09:02:12 -0700
Reply-To:     Rocket J Squirrel <camping.elliott@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rocket J Squirrel <camping.elliott@GMAIL.COM>
Subject:      Re: Problem with Stancor 120-901 relay??
Comments: To: pickle vanagon <greenvanagon@GMAIL.COM>
In-Reply-To:  <91c8f9760903171610r35531023nbaefdabf9fd79e70@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

Hey Wes,

Good catch on the Stancor's coil rating. -- Mike "Rocket J Squirrel" Elliott 84 Westfalia: Mellow Yellow ("The Electrical Banana") 74 Utility Trailer. Ladybug Trailer, Inc., San Juan Capistrano Bend, OR KG6RCR

On 3/17/2009 4:10 PM pickle vanagon wrote:

> I know the stancor 120-901 relay is popular among listmembers for > dual-battery setups, so I ordered one when I was preparing to do my big > electrical project. > > I finally got around to looking at the detailed spec sheet, and see that the > relay is rated for 12v of coil voltage, and is suited to take up to 10% more > than that. (The spec sheet is here: > http://www.stancor.com/wrdstc/pdfs/Catalog_2006/Pg_052_53.pdf). Of course, > 10% more than that is just 13.2 volts, which is below what you'll see in > your van when driving around. In fact, at the bottom of the spec sheet, > Stancor has printed the warning: > "Note: Caution must be used in coil selection for use in 12 volt systems > where battery charging may expose coil to continuous, higher-than-rated > voltage. Stancor will not be responsible for consequences of misapplied > solenoids." > > So, is this relay not such a good choice after all? > > On the other hand, it seems they have another relay (120-914) intended for > automotive use and rated up to 15volts (its on the same spec sheet). If I > read the spec sheet, this will come online at 11.25 volts (75% of 15), which > should be fine. Maybe this is an acceptable choice? > > Thoughts? > -Wes >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.