Date: Thu, 26 Mar 2009 16:12:00 -0700
Reply-To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject: Re: Pulsating Brake Pedal (Need Solution)
In-Reply-To: <f038a2e20903261342l118ae8a0x986012ce37cecc33@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
You seem to have a warped drum or possibly one which was machined off center
(it happened to me) . Check the drum, either on the axle as per Scott or
back at the place that turned them.
They might be under minimum thickness and have warped 'naturally'.
On Thu, Mar 26, 2009 at 1:42 PM, Blake Heinlein <blakeheinlein@gmail.com>wrote:
> Hi everyone, so here's my situation.
>
> My 1984 Westy has a pulsating brake pedal and undulating slowing during
> braking. I can actually see my leg move up and down while braking. I need
> help troubleshooting my problem.
>
> I have been able to isolate the culprit it to the back right wheel. How do
> I
> know this? If I clamp off the rubber brake line to the right rear wheel,
> the
> brake pedal is perfectly smooth and the stop is smooth. That means that 3
> of
> the brakes are working perfectly.
>
> Here is the work I have done and in order that is was completed. I always
> did the work to both sides of the van at the same time.
>
> 1. Replaced rear brake shoes about 1-1/2 years ago (Did not turn the rear
> drums at this time)
> 2. Had a local repair shop replace the rear wheel bearings about 1 year
> ago (This is the only work I hired out)
> 3. Bleed brake system and flushed with new fluid (The rest of the work
> was done in the last 2 months.
> 4. Installed new rear drums and the pulsation was worse so I returned
> them.
> 5. Turned the original rear drums and installed them
> 6. Installed new front wheel rotors and brake pads
> 7. Greased and adjusted the front wheel bearings
>
>
> Symptoms and/or current conditions of van:
>
> 1. There are no wheel vibrations while driving the van
> 2. None of the brakes drag when the brake pedal is up (brakes off)
> 3. The parking brake engages the rear brakes at 4 clicks. There is free
> play in the parking brake linkage when they are released.
> 4. The brake pedal feel is firm and high and does not leak down. The best
> I've had since I've owned the van.
> 5. The van stops quickly
> 6. The drum brakes are adjusted so they just slide on and then I backed
> the ratchet off by 3-4 clicks.
> 7. None of the 4 brake cylinders leak
> 8. I have checked that all the rear brake shoe linkage is properly
> assembled.
> 9. The drum brake positioning bolts are installed.
> 10. The drum brakes are free of dirt and grease at installation. Lightly
> sanded pads to removing any glazing
>
> Here are some of my thoughts about what might be wrong:
>
> 1. Axle is bent
> 2. Hub (part with the wheel studs) is bent
> 3. Something wrong with wheel bearings
> 4. Something wrong with proportioning valve to rear wheel
> 5. The axle nut is not torqued correctly
> 6. Brake pads don't seat properly in the drums (i.e. the
> curvature radius is different)
>
>
> So these are all my thoughts. Now it's your turn to help solve the puzzle.
> Thanks in advance to everyone.
>
> Blake HeinleinSacramento, CA
> http://blakeheinlein.googlepages.com/
>
--
Jake
1984 Vanagon GL
1986 Westy Weekender "Dixie"
Crescent Beach, BC
www.crescentbeachguitar.com
http://subyjake.googlepages.com/mydixiedarlin%27
|