Date:         Mon, 23 Mar 2009 14:17:11 -0400
Reply-To:     Tony Collins <tonycollin@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tony Collins <tonycollin@GMAIL.COM>
Subject:      Re: Front Bumper Removal/Fog Light Install
Comments: To: chris and/or ruth <populuxe59@yahoo.com>
In-Reply-To:  <979368.45874.qm@web83203.mail.mud.yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1

Those looked great, but there is a $25 minimun on the web-site. Did you find
them locally and if so in what store?

Thanks,
t.

On Sun, Mar 22, 2009 at 5:14 PM, chris and/or ruth <populuxe59@yahoo.com>wrote:

> Fog light brackets;
>
> Instead of drilling holes I used these brackets.  Cheap at $8 each.
>
>
> http://www.foxtaillights.com/52009-nightwatcher-clampon-mounting-bra52009.html
>
> The picture here shows the clamp from a top-down view.
>
>
> I used these clamps and some inexpensive fogs to replace the Projekt Zwo
> fog lights that I sold a couple months ago on the Samba. Not as classy as
> the Project Zwo's but: Looks OK. Functions well. Easy. Cheap. No mods
> needed.
>
> Chris C
> 90 MV
>
>
>
> On Sat, Mar 14, 2009 at 3:07 PM, Richard Golen <rgolen@hotmail.com> wrote:
>
>
>  > Hi,
> >
> > I am planning on installing some fog lights on my 87 Westy. I picked up
> > some fog light brackets that were made for the Vanagon on Ebay a few
> weeks
> > back. Apparently, in order to install the brackets, I have to remove the
> > front bumper. My Bentley shows instructions for removal of the later,
> > fiberglass covered bumpers. Haynes shows how to remove bumpers without
> the
> > rubber trim strip. Looks simple enough.
> >
> > However, I want to remove the rubber strip without damaging it. Any
> advice
> > or suggestions?
> >
> > Thanks.
> >
> > Ric
>



--
82 Scirocco "Rodolfo"
85 Vanagon "Blubrik, El Guapo"