yes, I believe that is correct. Seems to me it should be the other way though........that it would be easier to have the bushing that sticks through the hole in the frame on the rod first, and stuck through the hole first, so the other bushing is easier to put on over the already-through-the-hole bushing. But as you describe is correct I believe. seems it would not make any difference to me, which way they go, but I try to keep these sorts of things 'as factory' as much as possible. Scott www.turbovans.com
----- Original Message ----- From: "neil N" <musomuso@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, March 31, 2009 5:27 PM Subject: Radius arm bushings. Which one on front?
> Hi all. > > You'd think with all the pics I've taken I'd know this.... <grin> > > Quick question. I'm in the middle of front end assembly. > > Does the radius arm bushing with lip that fits in hole go on the > frontside of frame? (toward front bumper) > > Pretty sure it does, but can't tell from looking at Bentley. > > TIA and pics/tips soon! > > Neil. > > -- > Neil Nicholson '81 VanaJetta 2.0 "Jaco" > > http://tubaneil.googlepages.com/ > > http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.