Date:         Tue, 31 Mar 2009 02:03:05 -0400
Reply-To:     Robert Stewart <robertmstewart@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Stewart <robertmstewart@MAC.COM>
Subject:      Re: has anyone fabbed up 316-stainless fuel lines?
Comments: To: dylan friedman <insyncro@YAHOO.COM>
In-Reply-To:  <601626.53418.qm@web52108.mail.re2.yahoo.com>
Content-type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

Dylan,

Can you outline exactly what you purchased and detail the process of
installing it please. Any issues?

Thanks,
Robert
NY

On Mar 29, 2009, at 12:34 PM, dylan friedman wrote:

> I use Aeroquip line with -AN fittings.
> Very flexible and easy to use, looks great too.
> Price will be high for most.
>
> Speed shops and Summit racing have it.
> If you know your lenghts, there are many used pieces available from
> Nascar teams on eBay.
> Some that I have purchased that way have been pennies on the dollar.
>
> -AN sizing goes like this:
>
> -4AN = 4/16 or 1/4 inch, roughly $8.00/ft. and the ends ~$25@
>
> here is a reference site:
> http://www.stockcarproducts.com/aqpindx.htm
>
> Hope this helps.
>
>
> dylan
>
>
>
>
> ________________________________
> From: Sudhir Desai <sudhir.desai@GMAIL.COM>
> To: vanagon@GERRY.VANAGON.COM
> Sent: Sunday, March 29, 2009 11:57:33 AM
> Subject: has anyone fabbed up 316-stainless fuel lines?
>
> i'm curious if you copied the hard plastic line shape, or made your
> own.
> and did you start with straight pieces, or a coil.
>
> thanks in advance.
>
> sudhir