Date:         Tue, 31 Mar 2009 10:31:47 -0700
Reply-To:     brady <dofunk@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         brady <dofunk@YAHOO.COM>
Subject:      Re: Flywheel Sleeve - WBX 2.1L
Comments: To: Mike Collum <collum@MYFAIRPOINT.NET>
In-Reply-To:  <49D23FD2.3080408@myfairpoint.net>
Content-Type: text/plain; charset=us-ascii

Order bearing part BCA  # F-33126
You can find it on Rock auto.
This is the pilot bearing with the seal in it.
This bearing is the same that comes in the clutch kit but it has the seal in it and you then don't need that felt bearing to keep the dust out.
Just so you know the sach clutch kit uses a bearing with out this seal.



----- Original Message ----
From: Mike Collum <collum@MYFAIRPOINT.NET>
To: vanagon@GERRY.VANAGON.COM
Sent: Tuesday, March 31, 2009 11:07:46 AM
Subject: Re: Flywheel Sleeve - WBX 2.1L

John Rodgers wrote:
> So - does anyone have a clue where this sleeve can be acquired. It is a
> simple piece, and I feel it important for a proper repair, yet I cannot
> find it.


Did you read Pascal Giasson's post about using a diesel pilot bearing
that has the seal attached?  That way you wouldn't need the hard to find
metal piece nor the felt washer.  I had heard about using the diesel
pilot bearing before.

Mike